SanjayInfo Property · property.sanjayinfo.com
Plaster Calculator
Plaster Calculator
Cement and sand for wall plastering.
Dry vol = Area × Thickness × 1.27Loading calculator…
- Estimates only. Rates and assumptions are indicative and may change, so check current figures before you decide.
FAQ
+How is the plaster quantity calculated?
Wall area multiplied by plaster thickness gives the wet volume. Multiplying by 1.27 gives the dry volume of cement and sand needed, which is then split by the mix ratio.
+Why is the dry volume 1.27 times the wet volume?
Dry cement and sand pack down when mixed with water, so more dry material is needed. Some references use a slightly different factor.
+What plaster thickness is common?
Around 12 mm for internal walls, 15 to 20 mm for external walls and about 6 mm for ceilings. Your engineer may specify otherwise.
+Which mix ratio should I use?
1:4 is commonly used for external walls and 1:6 for internal walls. Follow your engineer's specification.
+Should I deduct doors and windows?
Yes. Deduct the openings from the wall area.
+Is this exact?
No. It is a planning estimate. Surface roughness and wastage change the real quantity.
Related tools
Paint Calculator
LiveLitres of paint needed for walls and ceilings.
Litres = Area × Coats ÷ CoverageTiles Calculator
LiveNumber of tiles and boxes for a floor or wall, with grout, adhesive and cost.
Tiles = Area ÷ Tile area × (1 + wastage)Flooring Calculator
LiveCompare the cost of marble, granite, Kota, wood, laminate and vinyl flooring for your area.
Cost = Area × (1 + wastage) × Rate