SanjayInfo Property · property.sanjayinfo.com
Steel for Slab & Beam
Steel for Slab & Beam
Reinforcement steel weight for slabs and beams.
Weight (kg/m) = D² ÷ 162Loading calculator…
- Estimates only. Rates and assumptions are indicative and may change, so check current figures before you decide.
FAQ
+What does D² ÷ 162 mean?
It gives the weight of a steel bar per metre in kg, where D is the bar diameter in mm. It comes from the density of steel.
+How do I find the steel needed for a slab or beam?
Work out the total length of each bar size from the structural drawing, then multiply by the weight per metre.
+Should I add allowance for laps and wastage?
Yes. Laps, bends and cutting add to the quantity. A small allowance is commonly added.
+Can I use a rule of thumb per sq ft instead?
Rules of thumb are rough. The structural design decides the steel required, so use the drawing.
+Can I use this to design a slab or beam?
No. This only converts bar sizes and lengths into weight. Design must be done by a structural engineer.
+Is the weight the same for all grades?
For the same diameter, the weight per metre is about the same. Grades differ in strength, not weight.
Related tools
Paint Calculator
LiveLitres of paint needed for walls and ceilings.
Litres = Area × Coats ÷ CoverageTiles Calculator
LiveNumber of tiles and boxes for a floor or wall, with grout, adhesive and cost.
Tiles = Area ÷ Tile area × (1 + wastage)Flooring Calculator
LiveCompare the cost of marble, granite, Kota, wood, laminate and vinyl flooring for your area.
Cost = Area × (1 + wastage) × Rate