Built-up vs Carpet Area

Convert between carpet, built-up and super built-up area.

Built-up = Carpet × (1 + wall %)

Property sizes are quoted in three ways: carpet area, built-up area and super built-up area. They are not the same, so a flat advertised at 1,100 sq ft may have far less usable space. This calculator converts between the three so you can compare homes fairly.

Loading calculator…

Worked example

  • A flat has a carpet area of 800 sq ft.
  • Walls add about 12%, so built-up area = 800 × 1.12 = 896 sq ft.
  • With a 25% share for common areas such as lobbies, stairs and lifts, super built-up area = 896 × 1.25 = 1,120 sq ft.

Good to know

  • Carpet area is the usable space inside the flat, where you could lay a carpet.
  • Built-up area is carpet area plus the thickness of the walls, and sometimes balconies.
  • Super built-up area adds a share of common areas. The loading percentage varies by project and city.
  • Under RERA, flats are to be sold on carpet area. Ask for the carpet area in writing.
  • Estimates only. Rates and assumptions are indicative and may change, so check current figures before you decide.

FAQ

+What is carpet area?

The net usable floor area inside the flat, excluding the thickness of the outer walls.

+What is built-up area?

Carpet area plus the area taken by the walls, and in many cases balconies and terraces.

+What is super built-up area?

Built-up area plus a share of common areas such as the lobby, stairs, lift and clubhouse.

+How much is the loading usually?

It varies by project. A common range is about 20 to 35% between carpet and super built-up area, but check the actual figure in your agreement.

+Which area should I use to compare prices?

Compare the price per sq ft of carpet area, since it reflects the space you can actually use.

+Is the conversion exact?

No. Wall thickness and common-area share differ in every building. Use the numbers from the builder's agreement and the RERA registration.

Related tools