SanjayInfo Property · property.sanjayinfo.com
FAR / FSI Calculator
FAR / FSI Calculator
Maximum buildable floor area for your plot.
Max floor area = Plot area × FARFAR (Floor Area Ratio), also called FSI (Floor Space Index) in some cities, limits how much floor area you can build on a plot. Enter your plot area and the FAR allowed by your local authority to see the maximum total floor area.
Loading calculator…
Worked example
- Plot area is 2,400 sq ft and the allowed FAR is 1.5.
- Maximum floor area = 2,400 × 1.5 = 3,600 sq ft in total.
- If each floor is 1,200 sq ft, the total fits 3 floors.
Good to know
- FAR and FSI mean the same thing. The name used depends on the city.
- The allowed FAR depends on the zone, road width, use (residential or commercial) and the local building rules. It is set by the local development or municipal authority.
- Some areas, such as stairs, lift shafts or parking, may or may not count toward FAR under local rules.
- Extra FAR may be available through paid or transferable options in some cities. Ask your local authority.
- Estimates only. Rates and assumptions are indicative and may change, so check current figures before you decide.
FAQ
+What is FAR?
FAR is the total built-up floor area of all floors divided by the plot area.
+What is the difference between FAR and FSI?
There is none in meaning. FSI is the term used in some states, FAR in others.
+How do I calculate the maximum floor area?
Multiply the plot area by the allowed FAR.
+Does a higher FAR mean a bigger house?
It means more total floor area is allowed. Ground coverage, height limits and setbacks still apply.
+Where do I find the FAR for my plot?
In the local building bye-laws or master plan, or by asking the municipal or development authority.
+Can I rely on this for building plan approval?
No. Your approved plan and the authority's rules decide what you can build. Confirm with an architect or the authority.
Related tools
Land Unit Converter
LiveConvert bigha, katha, guntha, cent, acre, sq ft and more.
Area × unit factor = target unitPlot Area Calculator
LiveArea of rectangular and irregular plots from side lengths.
Area = Length × BreadthBuilt-up vs Carpet Area
LiveConvert between carpet, built-up and super built-up area.
Built-up = Carpet × (1 + wall %)